Everflo 12v Pumps

Everflo 12v Pumps

Display per page
Sort by

Everflo 12v Pump, 8.3L/min - 4 bar

Everflo Demand Pump

Replacement For Agricultural Sprayers And Fluid Transfer Applications. Not Approved For Pumping Fuels. 
Can Be Mounted In Any Position And Is Self-priming Up To 2.5m above fluid level. (Manufacturer suggestion: If mounting vertically, the pump end should be mounted underneath the motor side.)

Can Be Used For The Following: 
Weed Spraying / Boating / Lawn Sprayers / Camping / Garden Sprayers / Nursery Spraying / Fence Spraying / Water transfer and more.

Details;

  • Polypropylene Pump Housing And Valve Plate
  • Viton® Valves â“ Santoprene® Diaphragm
  • Zinc Plated Steel Fasteners
  • Honeywell Micro Switch
  • 4.8 Bar (70 Psi) Max
  • 8.3L/min (2.2 Gpm) Max
  • Round-up® Ready
  • Self Priming To 2.5m (8')
  • 12v Dc
  • 7.5 Max Amps
  • 3/8 Female Npt Ports
  • Ce Approved*
  • Inline Fuse Protection
  • 1 Year Warranty

Can Not Be Used With Flammable Liquids.

$149.00 *
Product data sheet
In stock, ships within 24 hours
Delivery weight: 2.5 kg

Everflo 12v Pump, 11.4 L/min - 4 bar

EF3000 Demand Pump

When it comes to fluid transfer applications, the Everflo 12v On-Demand 3.0GPM Diaphragm Pump is the king the hill. This pump is loaded with features such as a Honeywell Micro Switch™, corrosion resistant Viton valves & Santoprene™ diaphragm, fiberglass-reinforced polypropylene pump manifold with ½” Female NPT ports. This is a terrific replacement for tired worn out pumps that have seen better days.

Applications:

This 12v  diaphragm pump is designed to handle a variety of delivery applications including, but not limited to: agricultural weed spraying (spot or broadcast),  Portable washing systems, water transferring, soft wash, irrigation systems, nursery mist spraying.

Product Specs;

  





 

Max Pressure 4 Bar (60 Psi)
Max Flow 11.4 L/min (3.0 Gpm)
Power Supply 12v
Max Amps 10
Self Priming Yes Up to 2m
Ports  Female 1/2" NPT
Weight (Dry) 2.55 Kg

 

 

 

$175.00 *
Product data sheet
In stock, ships within 24 hours
Delivery weight: 3 kg

Everflo 12v Pump, 3.8L/min - 2.8 bar

The Everflo EF1000 12-Volt Diaphragm Pump is a great replacement pump for agricultural sprayers and spot sprayers. It is also great for use in water transfer applications. 

With its Viton valves, Santoprene diaphragm, and polypropylene housing, this Everlflo 12V Diaphragm Pump can handle low flow, low pressure pumping applications up to 1.0 GPM and 40 PSI. Perfect for weed control, pest control, insect control, and agricultural spraying applications with Round-Up and other common agricultural chemicals, such as herbicides, pesticides, liquid fertilizers and insecticides.

This Everflo electric diaphragm pump comes with a pressure demand switch that is designed to turn the pump on and off automatically as flow is required. If turned on, the pump will prime itself, then turn off once attaining pressure. When the flow continues, the pump automatically restarts. This eliminates the requirement for a pressure regulator. When using demand pumps, keep in mind that a balanced flow is always best. If your spray gun or spray boom uses too small of a nozzle, it may restrict your flow resulting in the demand pump shutting down, in these cases a pressure control or Pump speed controller is best used. 

Specifications:
Max. Flow:  3.8 LPM (1.0 GPM)
Max. Pressure: 2.8 BAR (40 PSI)
Max. Fluid Temp: 60 deg. C
Max. Amp Draw: 4 Amps
Powered by a 12V DC electric motor
Inlet Port: 3/8" hose barb
Outlet Port: 3/8" hose barb
Polypropylene housing and valve plate
Viton delivery and suction valves
Santoprene diaphragm
4' (1.2 m) vertical self-priming operation
Honeywell Micro Switch turns off the motor if delivery stops and prevents maximum pressure from being surpassed
Inline fuse protector
CE approved
Lightweight, weighs only 600g
Dimensions: 178 mm long x 102 mm wide x 64 mm High

$69.00 *
Product data sheet
In stock, ships within 24 hours
Delivery weight: 700 g

12v Pump Wiring Loom

Wiring loom for 12v pumps

Takes the effort out of making up a wiring connection for your 12v pump. Easy plug & play setup.

Supplied with;

  • battery clamps
  • inline on/off switch
  • 2m dual core wire
$34.00 *
In stock, ships within 24 hours
Delivery weight: 350 g
*
Prices incl. GST, plus delivery