SHURflo 8000 7.4Bar Agriculture series pump

Specifications

• 6.8 l.p.m. open flow
• Max 7.4 Bar (107 psi)
• 6.9 bar (100PSI) demand switch with internal bypass 
• Inbuilt internal bypass system
• 1/2” BSP male outlets
• Santoprene® diaphragm
• Viton® valves
• 12 Volt with pressure cut out

*note we recommend using the Shurflo hose connection fittings to ensure correct fitment, performance and reliability & please read booklet supplied with pump.

Shurflo 60 Psi 12 volt pump with Viton®  valves

Optional equipment;

Specifications

• 6.8 l.p.m. open flow
• Max 6 Bar (60 psi) 
• 1/2” BSP male outlets
• Santoprene® diaphragm
• Viton® valves
• 12 Volt with pressure cut out

*note we recommend using the Shurflo hose connection fittings to ensure correct fitment, performance and reliability & please read booklet supplied with pump.

2088 Shurflo pump

Part of the 'Agriculture Series'  of SHURflo 12 volt pumps with Viton® valves! this is a step up on the standard unit which can fail through premature breakdown through lack of chemical resistance.

2088-343-435 SHURflo diaphragm pump is Shurflo’s specialist agriculture pump, ideal for boom spray (higher volumes and spot spray work. Viton® valve material and Santoprene diaphragms assures maximum chemical resistance. 11.3 litres/ minute 45 psi Ideal boom spray applications where higher volume may be required and works well with a spraygun especially when sprayer tank agitation is required whilst spraying. May also be used for a reliable camper-van/motor-home water pump. This pump is fitted with pressure cut out so when you turn off the tap the pump shuts down (unless there is a secondary outlet).

Note this Pump is also referred to as 2088-343-135 (Sprayer manufacturer dependent)

 This unit may be used to replace the pump on most 12v spray thanks if unsure just ask me, this unit can replace many standard SHURflo pumps where they were originally set up just for spot spray work but now boom spray work is also required.. 

Specifications 

• 11.3 l.p.m. open flow
• 3 Bar (45 psi)
• 1/2” BSP male 
• Santoprene diaphrams
• Viton® Valves
• 12 Volt with pressure cut out

2088 Shurflo pump

Part of the 'Agriculture Series'  of SHURflo 12 volt pumps with Viton® valves! this is a step up on the standard unit which can fail through premature breakdown through lack of chemical resistance.

The 2088-313-145 pump is designed for continuous use in spraying fluid transfer applications, these include boom spraying and spot spraying where bypass agitation systems are used and therefor the pump does not shut down.

• Premium Pump with Cooling Fins
• 13.6 LPM Open Flow
• 12VDC Continuous Duty
• Viton®  Valves
• Santoprene Diaphragm
• 3 Bar (45 PSI)
• Demand Switch (adjustable 30-50 PSI)
• 1/2" MSPT Ports
• Polypropylene Housing
• Rubber mounted base

Specifications

• Positive Displacement 3 Chamber Diaphragm Pump 
• CHECK VALVE: (1-Way Operation) Prevents Reverse Flow 
• CAM: 3.0 Degree 
• MOTOR: Permanent Magnet, P/N 11-185-06, Thermally Protected 
• VOLTAGE: 12 VDC Nominal 
• PRESSURE SWITCH: Adjustable from 30 to 50 PSI. Factory Set @ 45 PSI Shut-Off, Turn On 25 PSI 5 PSI 
• LIQUID TEMPERATURE: 170 Degrees Fahrenheit (77 Degrees Centigrade) Max. 
• PRIME: Self-Priming Up To 8.0 Ft. Vertical, Max. Inlet Pressure 30 PSI (2.1 Bar) 
• PORTS: 1/2"-14 Male Parallel Thread MATERIAL OF CONSTRUCTION: 
• PLASTICS- Polypropylene 
• VALVES- Viton 
• DIAPHRAGM- Santoprene 
• FASTENERS- Stainless Steel 
• NET WEIGHT: 6.8 Lbs (3.1 Kg) 
• DUTY CYCLE: Continuous (See Temperature Rise Chart) 
• TYPICAL APPLICATIONS: Agricultural Spraying 

Shurflo High Volume 12 Volt pump

The 5059 is the 'Big Boy' of the Shurflo Agricultural series pumps, it's ideal for operating dual hand guns even 3 in some applications or a larger size spray boom. The design of this pump allows it to replace/upgrade smaller Shurflo Models and can be used in many applications from weed spraying to fertilizer and even hydroponics whilst applications outside of agriculture can also be many and varied from camper water supply to fluid transfer even dog wash systems.

The new SHURflo® field-proven 20.1 L/min (5 GPM) pump delivers with current draw of only 13 amps! This pump is designed with a Santoprene diaphragm for chemical resistance and maximum life, as well as Viton® valves for maximum chemical resistance. Also included is a built-in pressure switch, set at 60 PSI [4.14 bar], which protects the pump in the event of blockage and hose kinks. The pump is available in the same footprint as other Shurflo pumps, allowing users to upgrade to a higher performance on existing installations.

A step up on standard 12 volt pumps Shurflo 'Agriculture' range can withstand many chemicals and last the test of time, ensuring you long life and hassle free days.

This unit is fitted to many Goldacres Sprayers along with other premium sprayer brands.

NOTE; This has a 60psi pressure switch cut out. 

Features;

• 20.1 Lpm open flow
• Field-proven pump head design
• Driven by a 12-volt, Shurflo® built sealed motor
• 1/2" MSPT male threads
• Santoprene diaphragms
• Viton Valves
• 12v continuous duty
• 12 volt 60 PSI pressure cut out switch
• Self priming to 2.4m
• Standard rubber isolation mount baseplate to enable upgrades from smaller size shurflo pumps (8000 & 2088 series)

we recomend the use of Shurflo hose fittings to ensure perfect sealing of threads without Teflon tape etc.