Nozzle Holders

Nozzle Holders

The Co-Op has large stocks of ARAG, TeeJet and Geoline nozzle holders along with colour coded caps to match spray tips.

Our best prices ensure you get great value for money along with fast supply.

Able to fit most Sprayer brands including SilvanCroplands. We even have retrofit Spray caps to fit Hardi Spray nozzle holders.


Display per page
Sort by

TeeJet Single Wet Boom Non Drip Nozzle Bodies

TeeJet Nozzle body Type QJ17560A

TeeJet boom spray single nozzle holder body QJ17560 is a very common nozzle holder that can fit many brands in Australia.

Special prices offered for Bulk lot purchases Contact Us

  • Features Chem-saver drip-free shutoff.
  • Requires 10 PSI (0.7 bar) at the nozzle to open check valve.
  • Option of special low and high pressure check valves available on request.
  • Maximum operating pressure of 300 PSI (20 bar).
  • Includes a mounting hole in upper clamp sub-assembly for mounting to flat surfaces.
  • Supplied with clamping screw and pipe gasket
Below is a breif I.D. Chart to assist you in selecting the correct Nozzle to Pipe diameter.
For example 1/2" pipe has a measured O.D. of 21.4mm
Please contact us if you are not confident of your pipe diameter before ordering and causing yourself frustration with receiving incorrect size nozzle holders,
 

Pipe/Tube measured diameter

equals

Relative Pipe/Tube size

20 mm = 20 mm tube
21.4 mm = 1/2" Pipe
25 mm = 25mm Tube
26.7 mm = 3/4" Pipe
33.6mm = 1" pipe

 

 

 

$10.45 *
Product data sheet
Ships within 24 hours
Delivery weight: 80 g

ARAG Quick Cap non-drip nozzle holders

ARAG Quick Cap nozzle holders

 
Special prices offered for Bulk lot purchases Contact Us
 
Hinged clamp type non-drip boom sprayer nozzle holder with diaphragm check valve and quick coupling (cap not included)
Common to many brands of sprayer on the Australian market.
Interchangable with TeeJet and Geoline Tecomec Nozzle holders.
Universal baynet nozzle cap mounting system accepts a wide variety of nozzle caps.
Rated up to 20 bar max pressure
 
Below is a breif I.D. Chart to assist you in selecting the correct Nozzle to Pipe diameter.
For example 1/2" pipe has a measured O.D. of 21.4mm
Please contact us if you are not confident of your pipe diameter before ordering and causing yourself frustration with receiving incorrect size nozzle holders.
 

Pipe/Tube measured diameter

equals

Relative Pipe/Tube size

20 mm = 20 mm tube
21.4 mm = 1/2" Pipe
25 mm = 25mm Tube
26.7 mm = 3/4" Pipe
33.6mm = 1" pipe
 
 
 
 
 

 

from $12.80 *
Product data sheet
In stock, ships within 24 hours
Delivery weight: 0.075 kg

Silvan Selecta Nozzle Holders 4 Pack

Silvan Nozzle holders 4 Pack

Non-drip nozzle holders to fit Silvan Spray booms (will also fit others)

4 nozzle holders with tube seal O-ring, mounting screws & Fan nozzle caps and gaskets.

Features

 
Non Drip shutoff valve pressure 0.5 Bar
Max Pressure rating 20 Bar (290 Psi)
7mm inlet
1/2" pipe size (22mm O.D.)

 

$85.00 *
In stock, ships within 24 hours
Delivery weight: 250 g

Single Swivel nozzle holder

These nozzles are sold by most of Australian manufacturers as standard equipment when ever an adjustable
angle nozzle holder is required.
 
The Arag Adjustable angle nozzle holder will allow you to:
   Offset direction by up to 90 degrees.
   Takes most styles of spray nozzles including teejet spraying systems etc,
   Thread is female BSP 1/4"
 
These are ideal for fence-line, under tree, under vine and nursery spraying where a certain spray angle is 
required for best affect.
 
Standard with 3/8”BSP caps - Spray tip not included Max. operating pressure.: 20 bar / 300 psi Weight: Single 67 g / 2.3 oz - Double 87 g / 3 oz Materials: nickel plated brass - stainless steel - Buna N - Shock resistance PA66 Use: for insecticides, fungicides and weed control. Industrial uses. Adjustable up to 270°. O Ring seals for drip proof adjustment. Two nuts to fix desired position.
$18.12 *
Ships within 24 hours
Delivery weight: 0.2 kg

Swivel nozzle holder assy

Swivel Nozzle Holder

 
These nozzles are sold by most of Australian manufacturers as standard equipment when ever an adjustable
angle nozzle holder is required.
 
The Adjustable angle nozzle holder will allow you to:
   Offset direction by up to 90 degrees.
   Takes most styles of spray nozzles including teejet spraying systems etc,
   Thread is Male BSP 1/4"
 
These are ideal for fence-line, under tree, undervine and nursery spraying where a certain spray angle is 
required for best affect.
 
$18.12 *
Ships within 24 hours
Delivery weight: 0.3 kg

Double Swivel nozzle holder with 1/4" male inlet BSP

These nozzles are sold by most of Australian manufacturers as standard equipment when ever an adjustable
angle nozzle holder is required.
 
The Arag Adjustable angle nozzle holder will allow you to:
   Offset direction by up to 90 degrees.
   Takes most styles of spray nozzles including teejet spraying systems etc,
   Thread is male BSP 1/4"
 
These are ideal for fence-line, under tree, under vine and nursery spraying where a certain spray angle is 
required for best affect.
 
Standard with 3/8”BSP caps - Spray tip not included Max. operating pressure.: 20 bar / 300 psi Weight: Single 67 g / 2.3 oz - Double 87 g / 3 oz Materials: nickel plated brass - stainless steel - Buna N - Shock resistance PA66 Use: for insecticides, fungicides and weed control. Industrial uses. Adjustable up to 270°. O Ring seals for drip proof adjustment. Two nuts to fix desired position.
$19.77 *
Ships within 24 hours
Delivery weight: 0.3 kg

Brass Swivel nozzle holder with 1/4" female inlet BSP

Brass Single Swivel Nozzle Holder

Chrome Plated Brass Single Swivel Nozzle Holder 1/4" BSP Female Inlet 

Ideal for Fence line boomsHorticulture Row CropNursery Spraying and industrial applications

applications. 

Nozzles not included.

  • 1/4" BSPM inlet 
  • Supplied with 3/8" BSP cap nut 
  • Chrome plated brass 
  • NBR seals & O-rings
  • Max press 50 Bar

 

 

 

$26.07 *
Ships within 24 hours
Delivery weight: 0.2 kg

Swivel single nozzle holder with 1/4" male inlet BSP

Brass Single Swivel Nozzle Holder 

Ideal for Specialist spraying Applications like Nursery and strawberry crops

  • 1/4" BSPM inlet 
  • Fitted with Nozzle cap
  • Chrome plated brass 
  • NBR seals & O-rings
  • Max press 50 Bar

 

$26.07 *
Ships within 24 hours
Delivery weight: 220 g

Brass Swivel Double nozzle holder

Swivel Twin Nozzle Holder

Ideal for Specialist spraying Applications like Nursery and strawberry crops

  • 1/4" BSPM inlet 
  • Supplied with nozzle nuts
  • Chrome plated brass 
  • NBR seals & O-rings
  • Max press 50 Bar
$33.83 *
Ships within 24 hours
Delivery weight: 0.2 kg

Swivel Double nozzle holder with 1/4" male inlet BSP

Brass Swivel Twin Nozzle Holder 1/4" Male Thread Inlet

Brass Swivel nozzle holder commonly used in fenceline spraying and Market garden Row Crop spraying, designed to accept most spray nozzles, can be fitted with a minature in line tap for independent on/off control

  • 1/4" BSPM inlet.
  • rated for up to 50 bar
  • also available in female thread and single nozzle design
  • Supplied with cap nuts
  • Chrome plated brass 
  • NBR seals & O-rings
  • Max press 50 Bar
$33.83 *
Ships within 24 hours
Delivery weight: 0.2 kg

Vari-Space nozzle clamps

Square tube Nozzle clamps.

Sizes available;

  • 3/4" (19mm)
  • 1" (25mm)
  • 1 1/4" (31.8mm)
  • 1 1/2" (38mm)

Use them to build your own boom

from $6.18 *
Ships within 24 hours
Delivery weight: 0.1 kg

Vari Space Quick Connect Nozzle Holder

Vari Space QC 'Dry boom' Nozzle bodies 

Single inlet, Quick Connect Bayonet Cap mount

Available in various hose sizes;

  • 3/8' (10mm)
  • 1/2" (13mm)
  • 3/4" (19mm)
  • Accepts Standard Quick connect nozzle caps as made by Arag, Teejet, Geoline etc

Wanting nozzle caps to?click here

from $9.37 *
Ships within 24 hours
Delivery weight: 0.75 g

ARAG Variable space non-drip nozzle 13mm holder single inlet

ARAG variable space nozzle holders.

Ideal for replacement on older sprayer or when building your own DIY spray boom.
Quick Cap system facitlitates correct spray tip positioning.

Intechangable with TeeJet vai-space nozzle holders.

Non-drip module ensures immediate start stop without chemical wastage.
Uses Vari-space mounting brackets in either square or round tube.
 
Available in 10mm. 13mm & 19mm hose barbs
$14.59 *
Product data sheet
In stock, ships within 24 hours
Delivery weight: 75 g

Vari-Space Quick Connect Nozzle Holder

Vari Space QC 'Dry boom' Nozzle bodies 

Through Flow Quick Connect Bayonet Cap mount

Available in various hose sizes;

  • 3/8' (10mm)
  • 1/2" (13mm)
  • 3/4" (19mm)
  • Accepts Standard Quick connect nozzle caps as made by Arag, Teejet, Geoline etc

Wanting nozzle caps to?click here

from $9.37 *
Ships within 24 hours
Delivery weight: 0.025 kg

ARAG Variable space non-drip nozzle holder dual barb

ARAG variable space nozzle holders.

Ideal for replacement on older sprayer or when building your own DIY spray boom.
Quick Cap system facitlitates correct spray tip positioning.

Intechangable with TeeJet vai-space nozzle holders.

Non-drip module ensures immediate start stop without chemical wastage.
Uses Vari-space mounting brackets in either square or round tube.
 
Available in 10mm. 13mm & 19mm hose barbs
from $14.59 *
Product data sheet
In stock, ships within 24 hours
Delivery weight: 75 g

Single Swivel Nozzle assy

Single Swivel Nozzle Holder with Quick Change Cap Mount

These nozzle holders a designed to take the same quick release cap as standard on most boom sprayers (not Hardi).

Adjust the nozzle spray outlet to the angle you need to get the job done right.
Great for fence-line spraying applications and Undervine, tree or other crops where targeted application is required below the canop
These are often used in nursery applications on the end of a spray wand to ensure coverage in hothouses.

1/4" Female BSP inlet.

$22.30 *
Ships within 24 hours
Delivery weight: 0.05 kg

Double Swivel nozzle assy w/- Quick change caps

Double Swivel Nozzle Holder

Adjust the nozzle spray outlet to the angle you need to get the job done right.
Great for fence-line spraying applications and Undervine, tree or other crops where targeted application is required below the canopy.
These are often used in nursery applications on the end of a spray wand to ensure coverage in hothouses.

1/4" Female BSP inlet.

Suitable for use with most standard quick fit bayonet mount spray nozzle caps (not Hardi)

$26.30 *
Ships within 24 hours
Delivery weight: 0.085 kg

Double Swivel nozzle holder

The Arag Adjustable angle nozzle holder will allow you to:
   Offset Spray direction by up to 90 degrees.
   Takes most styles of spray nozzles including teejet spraying systems, Lechler, Albuz etc,
   Thread is female BSP 1/4"
 
Ideal for fence-line, under tree, under vine and nursery spraying where a certain spray angle is required for best affect.
 
Standard with 3/8”BSP caps - Spray tip not included
Max. operating pressure.: 20 bar / 300 psi
Weight: Single 67 g / 2.3 oz - Double 87 g / 3 oz
Materials: nickel plated brass - stainless steel - Buna N - Shock resistance PA66
Use: for insecticides, fungicides and weed control.
Industrial uses. Adjustable up to 270°. O Ring seals for drip proof adjustment.
Two nuts to fix desired position.
$19.77 *
In stock, ships within 24 hours
Delivery weight: 0.3 kg

Nozzle Holder Hose Barbs

Outlet Hose Barbs to fit nozzle holders

Suitable to fit with TeeJet, Arag, Geoline & Hardi nozzle holders

Ideal for conncting additonal fenceline nozzle or dropper nozzles to spray booms

Can be used with both threaded or Quick release style Cone spray nozzle style nozzle holder caps.

from $2.55 *
Ships within 24 hours
Delivery weight: 40 g

Brass Variable Space nozzle holders

Dual inlet Variable Space Threaded Nozzle holder with internal 1/4 BSP thread for easy mounting of swivel nozzles etc.

Available in 10mm (3/8") and 13mm (1/2") hose barb connections.

Clamps available for both Round and Squre tube mounting in various sizes.

Ideal for custom building of spray booms for Nursery, Broadacre, Spray tunnels or washing systems

Use TeeJet 11/16"-16 threaded nozzle caps

from $29.15 *
In stock, ships within 24 hours
Delivery weight: 100 g

TeeJet Brass Swivel Nozzle holder

TeeJet swivel nozzle bodies are primarily for use with tips employed in row crop spraying. A locknut holds swivel bodies firmly in position at selected spray projection angle so they are not affected by jarring and vibration. 

Brass nozzle holder with 1/4" BSP threaded inlet 11/16"-16 thread Nozzle cap mount.

Ideal for spraying; fenclines, undervine, nursery, tunnel washing systems, automated car wash and many other applications.

Item Reference Male or Female inlet  Single or dual nozzle
1 Male Single
2 Female Single
3 Male Double
4 Femal Double

 

from $41.05 *
In stock, ships within 24 hours
Delivery weight: 150 g

Boom End Nozzle Holder with on/off

Adjustable Boomless Nozzle Holder

To be used without spraying boom, ideal for spraying orchards, vineyards, grasses and grazing lands

When fitted with boomless Nozzles (See Here) big size drops for low product drift, adjustable angle to have the most suitable spraying width.

thread: G 1/2 F; (1/2" BSP female)

4065_in_action_-_1_

$44.00 *
Product data sheet
In stock, ships within 24 hours
Delivery weight: 180 g

Spray boom fence line Kit

Fenceline nozzle Spray kit Simply screw it onto the boom spray pipe end.

Suitable For; Herbicides, Insecticides, Fungicides, Fertilizers

Connects to both ½” bsp male and female spray bars - versatile on any ½” spray tube 80 degrees air induction off-centre nozzle, creates big size drops for low product drift 360 degree adjustable spray direction to provide the most suitable spraying direction non-drip with on/off tap stops it from dripping and allows operator to turn on/off
  • With on/off valve enocrporated into the nozzle holder.
  • Adjustable nozzle direction – 360 degrees
  • Material; Polyethylene with Viton non drip diaphragm
  • An extra course or ultra course droplet size can be achieved with the yellow nozzle to assist in drift reduction
  • Manual shut off valve and non drip nozzle body.
Working pressure 2 Bar (30 PSI)

Max Pressure 15 Bar 213 Psi)

Supplied with AOC02 Off centre nozzle 
Other size nozzles Available: AOC025, AOC03, AOC04 and AOC05;
ISO 10625 standard – comply with colour and flow rate coding; Horizontal spray for fence line spraying

M99-73-fenceline-kit-rotation 4144_001 4065_in_action
$160.00 *
In stock, ships within 24 hours
Delivery weight: 1,000 g
*
Prices incl. GST, plus delivery