Outlet Hose Barbs to fit nozzle holders

Suitable to fit with TeeJet, Arag, Geoline & Hardi nozzle holders

Ideal for conncting additonal fenceline nozzle or dropper nozzles to spray booms

Can be used with both threaded or Quick release style Cone spray nozzle style nozzle holder caps.

"SUPERMIX" hydraulic agitator

The SUPERMIX body contains three circuits:
A Pressure
B Return
C Product injection, additional pump or air mixing

Circuit A: PRESSURE
By using the working pressure, the mixing power of SUPERMIX is greater than the performance of traditional systems, ensuring a flow rate of 300 to 1300 l/min. depending on the pump and nozzle used. Graph “A2” illustrates consumption, while graph “A1” shows the corresponding performance values using nozzles with diameter 1.5 - 2 - 2.5 - 3 mm.

Circuit B: RETURN
This circuit utilises the pump return flow during limit, control and tank filling operations, when all the pump delivery fluid passes through the circuit. Recommended for low-pressure treatments, average and low volumes, pneumatic systems and spraying.

Graph “B2” illustrates the residual pressure in the circuit at various flow rates, while graph “B1” shows the corresponding performance values without a nozzle and using nozzles with diameter 13 - 15 - 17 mm.
• Can be adapted to various tank shapes
• Double Venturi circuit to increase efficiency andreduce water consumption
• Threaded G ½ connector for simple installation on tank
• Suitable for low pressure (nozzles Ø 5-7-9- mm) or high pressure (nozzles Ø 2-3 mm) operation
• Polypropylene body

Crimp Hose Clamps

Ensure theres a minimum of drag/catch points and tight seal connection with crimp clamps, no risk of cutting hands catching on objects when passing.

Full Stainless Hose Clamps

TEFEN Nylon 66 industrial grade Hose barb TEE in various sizes.

High chemical resitance, Quality replacement items for your sprayer or other industrial applications

Working pressure Up to 14 BAR (200 psi) at 20 ºC

Smooth-Line Threaded Lids with fixed Labyrinth Breathers designed to ensure a large flow yet avoiding liquid out flow.

Made to current anti pollution standards, these lids are equipped with double breather valve to allow tank drainage without vaccum being caused even with high delivery pumps.

Common to Silvan, Selecta, Quickspray, Croplands, Hardi (some), BA Sprayers, Rapid Spray, TTI and many more brands.

Simply select the required 'Product Ref #', from the drop down box, then select 'Add to Basket'.

Smooth-Line Threaded Lids with fixed Labyrinth Breathers designed to ensure a large flow yet avoiding liquid out flow.

Made to current anti pollution standards, these lids are equipped with double breather valve to allow tank drainage without vaccum being caused even with high delivery pumps.

Common to Silvan, Selecta, Quickspray, Croplands, Hardi (some), BA Sprayers, Rapid Spray, TTI and many more brands.

Simply select the required 'Product Ref #', from the drop down box, then select 'Add to Basket'.

Made in Italy

5D (3/4" / 19mm) QC. to Straight and elbow barbs & 1/2" threads

Selection of both 10mm (3/8"),13mm (1/2") & 19mm (3/4") hose barbs  along with threaded 1/2" Bsp male threads.

Suit many models & brands with QC (snap in) pump connections including DELEVAN, FLOJET, STANLEY, NORTHSTAR, AQUATEC SMOOTHFLO, SEAFLO.

Details;

If you are uncertain if these can fit your pump send us an email.