Stainless Mesh, reinforced poly frame nozzle Strainers

Strainers protect the Nozzles spray tip orfice from clogging and damage. Stainless Steel Screens are available in 50, 80 & 100 mesh. Strainer bodies are reinforced to prevent colapsing under pressure when clogged.Ensure your spray nozzle tips are not clogging and get longest life by using correct filtration stages from Tank to the spray tip.

Fits all brands of standard nozzle holders including most swivel nozzle holders.

Available in various sizes

• 50 mesh
• 80 mesh
• 100 mesh

Sprayer and irrigation Filters screens

Stainless Steel Filter Elements to suits various inline Pressure filters & Suction filters.

Elements are Stainless Mesh unless otherwise stated.

If you can see the size you are in need of contact us for further assistance.

Please review dimensions as listed to ensure correct fitment, Just select Size and Mesh from the Drop down boxes

1/2" BSP-F Inline Pressure filter, boom or spot spray, particle filter
ARAG InLine filters have been designed to be fitted on the circuits of machines enabling better delivery flow-rate to sections.

The increasing request of high volumes of product to be distributed led to the creation of a filter on the delivery line able to work at high pressure values (10 bar) and featuring large inner passages.

Thanks to the high flow-rate of up to 55L/min and to the minimum pressure drop, allows designing circuits a maximum compactness and efficiency.
Ideal for connection inline on Sprayng, irrigation or watering systems.

Easily installed on each section of a boom sprayer these can eliminate the need for individual nozzle filters in many circumstances.

Supplied with a Stainless steel 50 mesh screen as standard, other mesh sizes avaialable on request at time of ordering are 32, 80 & 100 Mesh.

GENERAL FEATURES.

• Female threads 1/2" BSP
• Fixing points on both sides
• Polypropylene body
• Line filters series 324-0. 1/2" BSP Female threads .
• Max. working pressure 10 bar (145 PSI) .
• Filtering capacity 55 l/min to 0.5 bar.
• Stainless steel cartridge A 27 x 69 mm .
• Fibreglass-reinforced polypropylene body .
• EPDM gaskets

12v pump suction filter

Suction filters increases longevity of your 12v pump and components by reducing unnecessary premature wear and blockages.

Large screen area, the screen is reinforced against collapsing as can occur, its easily serviced and will assist in ensuring better productivity and longer pump life.

For use on Shurflo*, Silvan Smoothflo*, Seaflo* and other 12v pumps. 

Connects straight to the pump inlet and is fitted with a 1/2" hose tail.

• Filter screen is 50 mesh, its also easily removed for service.
• 1/2" Female fly nut allows direct mounting to pump
• The larger size filter screen means longer service intervals.
• The filter housing can be rotated to 360° to allow you to best position the suction hose

* some models

Quick Connect 12v pump suction filter

Suction filters increases longevity of your 12v pump and components by reducing unnecessary premature wear and blockages.

Large screen area, the screen is reinforced against collapsing as can occur, its easily serviced and will assist in ensuring better productivity and longer pump life.

For use on Flojet*, Delavan*, Silvan Smoothflo*, Seaflo*, Northstar & Stanley 12v pumps. 

Connects straight to the pump inlet and is fitted with a 5D 19mm (3/4") quick connect mount

Filter screen is 50 mesh, its also easily removed for service.
Suits all 5D 19mm (3/4") quick connect pumps.
The larger size filter screen means longer service intervals.
The filter housing can be rotated to 360° to allow you to best position the suction hose

* some models

Quick Connect 12v pump suction filter

Suction filters increases longevity of your 12v pump and components by reducing unnecessary premature wear and blockages.

Large screen area, the screen is reinforced against collapsing as can occur, its easily serviced and will assist in ensuring better productivity and longer pump life.

For use on Flojet*, Delavan*, Seaflo* and other 3D quick connect 12v pumps. 

Filter screen is 50 mesh, its also easily removed for service.

Connects straight to the pump inlet and is fitted with a 3D 16mm (5/8") quick connect mount

Suits all 3D 16mm (5/8") quick connect pumps.
The larger size filter screen means longer service intervals.
The filter housing can be rotated to 360° to allow you to best position the suction hose

* some models

1/2" & 3/4" BSP-M Inline Pressure filter, boom for spot spraying, particle filter
ARAG InLine filters designed to be fitted to booms enabling better delivery flow-rate to Spray bars.

Ideal for connection inline on Sprayng, irrigation or watering systems.

GENERAL FEATURES

• Male threads 1/2" or 3/4" BSP 
• Max. working pressure 14 bar
• Filtering capacity 80÷100 l/min
• Cartridge Ø 38x89 mm
• Fixing points on both sides
• Polypropylene body
• 32, 50, 80 & 100 Mesh options

ARAG Pressure Line filters 1" Female threaded mount have been designed to be fitted on the circuits of machines enabling better delivery flow-rate to sections.

The increasing request of high volumes of product to be distributed led to the creation of a filter on the delivery line able to work at high pressure values (14 bar) and featuring large inner passages.

Thanks to the high flow-rate of 150-160 l/min and to the minimum pressure drop, allows designing circuits a maximum compactness and efficiency.
Ideal for connection inline on Sprayng, irrigation or watering systems.

Easily installed on each section of a boom sprayer these can eliminate the need for individual nozzle filters in many circumstances.

Supplied with a Stainless steel 50 mesh screen as standard, other mesh sizes avaialable on request at time of ordering are 32, 80 & 100 Mesh.

• G 1 threads
• Max. working pressure 14 bar (200 PSI)
• Filtering capacity 150÷160 l/min
• Cartridge Ø 38 x 125 mm
• Fixing points on both sides
• Polypropylene body
• EPDM gaskets
• 32, 50, 80 & 100 mesh options

ARAG Self cleaning Pressure Line filters 1" female threaded mount have been designed to be fitted on the circuits of machines enabling better delivery flow-rate to sections.

The increasing request of high volumes of product to be distributed led to the creation of a filter on the delivery line able to work at high pressure values (14 bar) and featuring large inner passages.

Thanks to the high flow-rate of 150-160 l/min and to the minimum pressure drop, allows designing circuits a maximum compactness and efficiency.
Ideal for connection inline on Sprayng, irrigation or watering systems.

Easily installed on each section of a boom sprayer these can eliminate the need for individual nozzle filters in many circumstances.

Supplied with a Stainless steel 50 mesh screen as standard, other mesh sizes avaialable on request at time of ordering are 32, 80 & 100 Mesh.

• G 1 threads
• Max. working pressure 14 bar (200 PSI)
• Filtering capacity 150÷160 l/min
• Cartridge Ø 38 x 125 mm
• Fixing points on both sides
• Polypropylene body
• EPDM gaskets (VITON® optional)
• By-pass min. 23 l/min.

Self-cleaning line filters threaded coupling
• G 1 1/4 and G 1 1/2threads
• Max. working pressure 15 bar (220 PSI)
• Filtering capacity 200 ÷ 280 l/min
• Cartridge Ø 58 x 210 mm
• Fixing points on both sides
• Polypropylene body
• EPDM gaskets®
• By-pass min. 30 l/min.

Self-cleaning line filters threaded coupling
• G 1 1/4 and G 1 1/2threads
• Max. working pressure 15 bar (220 PSI)
• Filtering capacity 200 ÷ 280 l/min
• Cartridge Ø 58 x 210 mm
• Fixing points on both sides
• Polypropylene body
• EPDM gaskets®
• By-pass min. 30 l/min.

Sprayer inLine filters 

• Selection of 1 1/4 and 1 1/2threads
• Max. working pressure 15 bar (220 PSI)
• Filtering capacity 200 ÷ 280 l/min
• Cartridge Ø 58 x 210 mm
• Fixing points on both sides
• Polypropylene body
• EPDM gaskets

Suction Filters 314 Series with Stop Valve

Available in 1 1/4" or 1 1/2" BSP threads.

• Filtering Capacity 100~160 L/min
• Cartridge 80 x 170 mm
• Polypropylene body
• EPDM gaskets
• Brass fixing inserts
• 32, 50 & 80 mesh

Note this unit is design for 'suction' applications only.

Suction Filters 314 Series with stop valve

Available in 1 1/2" or 2" BSPF threads.

• Filtering Capacity 160~220 L/min
• available with either 24mm or 45mm inlet port threads
• Cartridge 107 x 200 mm
• Polypropylene body
• EPDM gaskets
• Brass fixing inserts

Note this unit is design for 'suction' applications only.

Suction Filters 314 Series

Available in 1 1/2" or 2" BSPF threads, suitable for a Orchard & Vineyard Sprayers along with Large volume broadacre boom sprayers, also suitable for many other uses including primary irrigation and screening filtration systems

• Filtering Capacity 160~220 L/min
• Inlet port lengths of either 27mm or 45mm 
• Cartridge 107 x 200 mm
• Polypropylene body
• EPDM gaskets
• Brass fixing inserts

Note this unit is design for 'suction' applications only.

Stainless Mesh Cup Strainer

Versatile and cost effective strainer for use in Nozzle holders as final filtration prior to spray tip.

Can also be used in some sprayguns.

Protect your spray nozzles from premature wear and irreversible damage caused by poor filtration.