Pumps

Pumps

Display per page
Sort by

Flojet 2100-122 8L/min 60psi 12 v pump

Flojet 2100-122

Flojet 8 LPM 12VDC 60 PSI self priming diaphragm demand water pump. Constructed with polypropylene housing, viton check valves & diaphragm to handle a broad range of agricultural and chemicals products plus many other applications

  • In built  pressure switch automatically starts and stops the pump when the discharge valve opens and closes.
  • Ball bearing drive throughout the pump and motor assures longer pump life,
  • Self-priming up to 2.4m so the pump can be located above the supply tank,
  • Can run dry for short periods of time without damage,
  • Built-in thermal protection,
  • Low Amp draw for battery powered applications,
  • Heavy duty ball bearing drive system
2100-122

Maximum Flow is 8 LPM (Open Flow)
Maximum Pressure is 420 kPa (60 psi) cut-out pressure,
Power input is 12v DC,
Diaphragms are Viton,
Check Valves are Viton,
Pump Body is Polypropylene,
Connections are 3/8″ female BSP threads,
Maximum liquid temperature is 54 degrees C.

$297.00 *
Old price $335.00
Delivery weight: 2.5 kg

FloJet 2100-232 6L/min 95 psi 240V Pump

Flojet 2100 series, diaphragm pump.

Suitable Uses - Continuous duty as a medium volume water supply for carpet cleaning machines. 
Suitable liquids - Many chemicals, sea water, fresh water, sugars, whisky and wine etc.
Warranty - 12 months National Warranty Aust wide.

Materials used -

  • Pump Head: Polypropylene   
  • Diaphragms: Santoprene   
  • Valves: Santoprene

Electrical -

  • Voltage: 230v AC   
  • Amp draw: 0.25A   
  • Watts: 57W   
  • Power lead length: 40cm

Pressure switch - Cut out pressure: 60 PSI (4.1 bar)

Self prime - Up to 2.4m maximum. Self-priming.

Liquid Temperature - 54°C Maximum

Inlet/Outlet Ports - 3/8" Female NPT thread


It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump.)
For vertical pump mounting be sure that the motor is located on top.
Pump head may be rotated in 90° increments to simplify plumbing.
Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve is opened and closed.

  • Can run dry without damage and handle liquids up to 54°C.
  • Duplex Diaphragm Design eliminates troublesome shaft seal.
  • No metal contact with liquid being pumped.
  • Ball bearing drive throughout pump and motor assures longer pump life.
  • Excellent self-priming capability. Pump may be located above the liquid level.
  • Powerful, permanent magnet motor with low current draw and long life brushes.

This pump is supplied as a spare part and must be installed by a licensed electrican or service person.

$359.00 *
Old price $375.00
Delivery weight: 2.9 kg

Flojet 2100-734 8L/min 50psi 12 v pump

Flojet 2100-734

Flojet 8 LPM 12VDC 50 PSI self priming diaphragm liquid pump. Constructed with polyprolylene housing, viton check valves & diaphragm to handle a broad range of agricultural chemical products plus many other applications

  • Ball bearing drive throughout the pump and motor assures longer pump life,
  • Self-priming up to 2.4m so the pump can be located above the supply tank,
  • Can run dry without damage,
  • Built-in thermal protection,
  • Low Amp draw for battery powered applications,
  • Heavy duty ball bearing drive system

Features

Designed for use with pressure relief valve
Maximum Flow is 8 LPM (Open Flow)
Maximum Pressure is 50 PSI,
Power input is 12v DC, Motor Fan cooled for harsh conditions
Diaphragms are Viton,
Check Valves are Viton,
Pump Body is Polypropylene,
Connections are 3/8″ female BSP threads,
Maximum liquid temperature is 54 degrees C.
$305.00 *
Old price $345.00
Delivery weight: 1.8 kg

Flojet 2100-777 6L/min 60 psi 12 v pump

Flojet 2100-777

Flojet 8 LPM 12VDC 60 PSI self priming diaphragm demand water pump. Constructed with polypropylene housing, viton check valves & santoprene diaphragm to handle a broad range of agricultural and chemicals products plus many other applications

  • In built  pressure switch automatically starts and stops the pump when the discharge valve opens and closes.
  • Ball bearing drive throughout the pump and motor assures longer pump life,
  • Self-priming up to 2.4m so the pump can be located above the supply tank,
  • Can run dry for short periods of time without damage,
  • Built-in thermal protection,
  • Low Amp draw for battery powered applications,
  • Heavy duty ball bearing drive system

2100-777

Maximum Flow is 8 LPM (Open Flow)
Maximum Pressure is 420 kPa (60 psi) cut-out pressure,
Power input is 12v DC,
Diaphragms are Viton,
Check Valves are Viton,
Pump Body is Polypropylene,
Connections are 3/8″ female BSP threads,
Maximum liquid temperature is 54 degrees C.

$282.00 *
Old price $319.00
Delivery weight: 1.8 kg

Flojet 2100-848 8L/min 60 psi 12 v pump

Flojet 2100-848

Flojet 8 LPM 12VDC 50 PSI self priming diaphragm liquid pump. Constructed with polyprolylene housing, viton check valves & santoprene diaphragm to handle a broad range of agricultural chemical products plus many other applications

  • Ball bearing drive throughout the pump and motor assures longer pump life, Fan cooled motor for tough environments
  • Self-priming up to 2.4m so the pump can be located above the supply tank,
  • Can run dry without damage,
  • Built-in thermal protection,
  • Low Amp draw for battery powered applications,
  • Heavy duty ball bearing drive system

Features

Designed to be used with pressure relief valve
Maximum Flow is 8 LPM (Open Flow)
Maximum Pressure is 50 PSI,
Power input is 12v DC, Motor Fan cooled for harsh conditions
Diaphragms are Viton,
Check Valves are Santoprene
Pump Body is Polypropylene,
Connections are 3/8″ female BSP threads,
Maximum liquid temperature is 54 degrees C.
$352.00 *
Old price $389.00
Delivery weight: 1.8 kg

Flojet 2130-132A 6.8Lmin 95 psi 12 v pump

Flojet 2130-132

Flojet 6.8 LPM 12VDC 95 PSI self priming diaphragm demand water pump. Constructed with polypropylene housing, EDPM check valves & diaphragm to handle a broad range of agricultural and chemicals products plus many other applications

  • In built  pressure switch automatically starts and stops the pump when the discharge valve opens and closes.
  • Ball bearing drive throughout the pump and motor assures longer pump life,
  • Self-priming up to 2.4m so the pump can be located above the supply tank,
  • Can run dry for short periods of time without damage,
  • Fan cooled motor for improved running in tough conditions
  • Built-in thermal protection,
  • Low Amp draw for battery powered applications
  • 1/4 female ports
  • Heavy duty ball bearing drive system

Features

Maximum Flow is 6.8 LPM (Open Flow)
Maximum Pressure is 6.5 bar (95 psi) cut-out pressure,
Power input is 12v DC, Motor fitted with fan,
Diaphragms are EDPM,
Check Valves are EDPM
Pump Body is Polypropylene,
Connections are 1/4″ female BSP threads,
Maximum liquid temperature is 54 degrees C.

$336.75 *
Old price $375.00
Delivery weight: 2.4 kg

FloJet 2135-568 6.5L/min 75 psi 12v Pump

Flojet 2135-568

This unit was standard equipment on early Croplands ATV spray units.

  • Maximum Flow is 6.4 LPM (Open Flow)
  • Maximum Pressure is 6 bar  (75 psi) cut-out pressure,
  • Power input is 12v DC,
  • Diaphragms are Buna,
  • Check Valves are Viton,
  • Pump Body is Polypropylene,
  • Connections are 1/4″ female BSP threads,
  • Maximum liquid temperature is 54 degrees C.

 

Flojet 6.4 LPM 12VDC 75 PSI self priming diaphragm demand water pump.

Constructed with polypropylene housing, viton check valves & Buna diaphragm to handle a broad range of agricultural and chemicals products plus many other applications

  • In built  pressure switch automatically starts and stops the pump when the discharge valve opens and closes.
  • Ball bearing drive throughout the pump and motor assures longer pump life,
  • Self-priming up to 2.4m so the pump can be located above the supply tank,
  • Can run dry for short periods of time without damage,
  • Built-in thermal protection,
  • Low Amp draw for battery powered applications,
  • Heavy duty ball bearing drive system
$313.00 *
Delivery weight: 2.9 kg

Flojet 3501-503 8L/min 60psi 12v pump

Flojet 3501-503

FLOJET Industrial Triplex Low Pressure Series 12v pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling a broad range of chemicals. The Triplex Low Pressure diaphragm pumps are selfpriming and can run dry without harm. They are intended for intermittent duty cycles but can be run continuously for short periods of time. The higher the duty cycle,the shorter the expected life of the pump. Typical pump uses are liquid transfer, spraying, cooling, circulation, filtration and dispensing.

• Compact automatic demand pump
• Sealed pressure switch and motor
• Self-priming, pump can be located above supply tank
• Can run dry for extended periods of time without damage
• Flow rates to 2.0 GPM (7.6 l/min) and operating pressure to 50 psi (3.4 bar)
• Fitted with 4 Bar (60 PSI) Pressure Switch
• Internal bypass for smooth running even at low flows
• On/off rocker switch on pump body
• Viton valves, Santonprene diaphragm

3501-506

Flow Rate                          7.8 lpm

Motor                                   Permanent magnet TENV (non-ventilated)

Pump Design                    Three Chamber

Voltage                                12 Vdc

Amp Draw                            8 amp

Pressure Switch Setting    2.0-4.1 bar 30-60 psi

Max. Operating Pressure   3.4 bar 50 psi

Max. Fluid Temperature      54 °C 130 °F

Self Priming                          Up  to 2.4m vertical height

Port(s)                                    3/8” NPTF

Wetted Parts                          Housing – Reinforced Polypropylene

Elastomers                            Santoprene®, Viton®

Weight                                    1.5 kg

$241.00 *
Old price $279.00
Delivery weight: 1.8 kg

Flojet 3501-506 8L/min 60psi 12v pump

Flojet 3501-506

FLOJET Industrial Triplex Low Pressure Series pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling a broad range of chemicals. The Triplex Low Pressure diaphragm pumps are selfpriming and can run dry without harm. They are intended for intermittent duty cycles but can be run continuously for short periods of time. The higher the duty cycle,the shorter the expected life of the pump. Typical pump uses are liquid transfer, spraying, cooling, circulation, filtration and dispensing.

• Compact automatic demand pump
• Sealed pressure switch and motor
• Self-priming, pump can be located above supply tank
• Can run dry for extended periods of time without damage
• Flow rates to 2.0 GPM (7.6 l/min) and operating pressure to 50 psi (3.4 bar)

• Fitted with 4 Bar (60 PSI) Pressure Switch
• Internal bypass for smooth running even at low flows
• Viton valves, Santonprene diaphragm

3501-506

Flow Rate                          7.8 lpm  (open flow)

Motor                                   Permanent magnet TENV (non-ventilated)

Pump Design                    Three Chamber

Voltage                                12 Vdc

Amp Draw                            8 amp

Pressure Switch Setting    2.0-4.1 bar 30-60 psi

Max. Operating Pressure   3.4 bar 50 psi

Max. Fluid Temperature      54 °C 130 °F

Self Priming                          Up  to 2.4m vertical height

Port(s)                                    3/8” NPTF

Wetted Parts                          Housing – Reinforced Polypropylene

Elastomers                            Santoprene®, Viton®

Weight                                    1.5 kg

$214.00 *
Old price $236.00
Delivery weight: 1.8 kg

Flojet 3251-139 15.1L/min 60psi 12v pump

Flojet 3521-500

FLOJET 3521 Series Triplex Low Pressure Series pumps (15.1 LPM open flow) are designed for a wide range of applications and are constructed from a selection of materials suitable for handling a broad range of chemicals.

The 3521-500 and 3521-139 Triplex pumps are suitable for a number of applications including running small booms.  The internal bypass fitted to this model makes it a very flexible pump suitable for a wide range of applications from spot spraying to a small boom (up to 6 m). Triplex Low Pressure diaphragm pumps are selfpriming and can run dry without harm. They are intended for intermittent duty cycles but can be run continuously for short periods of time. The higher the duty cycle,the shorter the expected life of the pump. Typical pump uses are liquid transfer, spraying, cooling, circulation, filtration and dispensing.

• Compact automatic demand pump
• Sealed pressure switch and motor
• Self-priming, pump can be located above supply tank
• Can run dry for extended periods of time without damage
• Flow rates to 15.1 and operating pressure to 50 psi (3.4 bar)
• Fitted with 4 Bar (60 PSI) Pressure Switch
• Internal bypass for smooth running even at low flows
• Viton valves, Santonprene diaphragm

3521-500

Flow Rate                          15  lpm  (open flow)

Motor                                   Permanent magnet TENV (non-ventilated)

Pump Design                    Three Chamber

Voltage                                12 Vdc

Amp Draw                            8 amp

Pressure Switch Setting    2.0-4.1 bar 30-60 psi

Max. Operating Pressure   3.4 bar 50 psi

Max. Fluid Temperature      54 °C 130 °F

Self Priming                          Up  to 2.4m vertical height

Port(s)                                    Plug in Flojet fitting

Wetted Parts                          Housing – Reinforced Polypropylene

Elastomers                            Santoprene®, Viton®

Weight                                    1.5 kg

$269.00 *
Old price $280.91
Delivery weight: 1.8 kg

Flojet 3251-500 15.1L/min 60psi 12v pump

Flojet 3521-500

FLOJET 3521 Series Triplex Low Pressure Series pumps (15.1 LPM open flow) are designed for a wide range of applications and are constructed from a selection of materials suitable for handling a broad range of chemicals.

The 3521-500 and 3521-139 Triplex pumps are suitable for a number of applications including running small booms.  The internal bypass fitted to this model makes it a very flexible pump suitable for a wide range of applications from spot spraying to a small boom (up to 6 m). Triplex Low Pressure diaphragm pumps are selfpriming and can run dry without harm. They are intended for intermittent duty cycles but can be run continuously for short periods of time. The higher the duty cycle,the shorter the expected life of the pump. Typical pump uses are liquid transfer, spraying, cooling, circulation, filtration and dispensing.

• Compact automatic demand pump
• Sealed pressure switch and motor
• Self-priming, pump can be located above supply tank
• Can run dry for extended periods of time without damage
• Flow rates to 15.1 and operating pressure to 50 psi (3.4 bar)
• Fitted with 4 Bar (60 PSI) Pressure Switch
• Internal bypass for smooth running even at low flows
• Viton valves, Santonprene diaphragm

3521-500

Flow Rate                          15.1  lpm  (open flow)

Motor                                   Permanent magnet TENV (non-ventilated)

Pump Design                    Three Chamber

Voltage                                12 Vdc

Amp Draw                            8 amp

Pressure Switch Setting    2.0-4.1 bar 30-60 psi

Max. Operating Pressure   3.4 bar 50 psi

Max. Fluid Temperature      54 °C 130 °F

Self Priming                          Up  to 2.4m vertical height

Port(s)                                    Plug in Flojet fitting

Wetted Parts                          Housing – Reinforced Polypropylene

Elastomers                            Santoprene®, Viton®

Weight                                    1.5 kg

$315.00 *
Old price $339.00
Delivery weight: 2 kg

Flojet 4100-113 18L/min 45psi 12v pump

Flojet 4100-113

Flojet 4100 series pumps are suitable for a wide range of agricultural and industrial applications. With flow rates to 18 LPM and pressure to 45 PSI the 4100 series pump range is suitable for boom spraying as well as application and transfer of many chemicals.

The Flojet 4100-113 has an open flow rate of 18 LPM and is fitted with Buna checkvalves and geolast diaphragms.
The Flojet 4100 series is a self-priming pump.
The flojet 4100-113 is not fitted with a pressure switch.
Ideal for use with a pressure releif valve

It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump).

Features

  • Compact design and plug-in port fitting make installation easy.
  • Can run dry without damage and handle liquids up to 54° C.
  • No metal contact with liquid being pumped.
  • Ball bearing drive throughout pump and motor assures longer pump life.
  • Excellent self-priming capability. Pump may be located above the liquid level.
  • Powerful, permanent magnet motor with low current draw and long life brushes.
$333.50 *
Old price $366.99
Delivery weight: 1.8 kg

Flojet 4100-143 18L/min 45psi 12v pump

Flojet 4100-143

Flojet 4100 series pumps are suitable for a wide range of agricultural and industrial applications. With flow rates to 18 LPM and pressure to 45 PSI the 4100 series pump range is suitable for boom spraying as well as application and transfer of many chemicals.

The Flojet 4100-143 has an open flow rate of 18 LPM and is fitted with EPDM checkvalves and santoprene diaphragms.
The Flojet 4100 series is a self-priming pump.
The Flojet 4100-143 is not fitted with a pressure switch.
Ideal to use with pressure relief valve.

It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump).

For vertical pump mounting be sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak.

Features

  • Compact design and plug-in port fitting make installation easy.
  • Can run dry without damage and handle liquids up to 54° C.
  • No metal contact with liquid being pumped.
  • Ball bearing drive throughout pump and motor assures longer pump life.
  • Excellent self-priming capability. Pump may be located above the liquid level.
  • Powerful, permanent magnet motor with low current draw and long life brushes.
$305.00 *
Old price $335.00
Delivery weight: 1.8 kg

Flojet 4100-505 14L/min 45psi 12v pump

Flojet 4100-505

Flojet 4100 series pumps are suitable for a wide range of agricultural and industrial applications. With flow rates up to 18 LPM and pressure to 45 PSI the 4100 series pump range is suitable for boom spraying as well as application and transfer of many chemicals.

The Flojet 4100-505 has an open flow rate of 14 LPM and is fitted with Viton check valves and santoprene diaphragms.
The Flojet 4100 series is a self-priming pump.
ideal for use with pressure relief valve.
It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump).

For vertical pump mounting be sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak.

4100-505
  • Compact design and plug-in port fitting make installation easy.
  • Can run dry without damage and handle liquids up to 54° C.
  • No metal contact with liquid being pumped.
  • Ball bearing drive throughout pump and motor assures longer pump life.
  • Excellent self-priming capability. Pump may be located above the liquid level.
  • Powerful, permanent magnet motor with low current draw and long life brushes.
$265.00 *
Old price $295.00
Delivery weight: 2.5 kg

Flojet 4300-142 14L/min 45psi 12v pump

Flojet 4300-142

Flojet 4300 series pumps are suitable for a wide range of agricultural and industrial applications. With flow rates to 18 LPM and pressure to 45 PSI the 4300 series pump range is suitable for boom spraying as well as application and transfer of many chemicals.

The Flojet 4300-142 has an open flow rate of 14 LPM and is fitted with EPDM checkvalves and santoprene diaphragms.

The Flojet 4300 series is a self-priming pump. It is fitted with a pressure switch to provide “on demand” spraying and cut out.

It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump).

For vertical pump mounting be sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak.

Features

• Self-primes up to 2.4m vertical lift
• Handles Water-Like and Viscous Liquids up to 250 cP
• Four-piston design delivers higher flow rates
• Chemical-resistant polypropylene pump head for Iong life
• Choice of elastomeric materials to work with many chemicals
• Quick-connect plug-in ports for easy installation
• In built pressure-switch control to run the pump only as needed

$290.00 *
Old price $290.00
Delivery weight: 3.5 kg

Flojet 4300-143A 18L/min 45psi 12v pump

Flojet 4300-143

Flojet 4300 series pumps are suitable for a wide range of agricultural and industrial applications. With flow rates to 18 LPM and pressure to 45 PSI the 4300 series pump range is suitable for boom spraying as well as application and transfer of many chemicals.

The Flojet 4300-143 has an open flow rate of 18 LPM and is fitted with EPDM checkvalves and santoprene diaphragms.

The Flojet 4300 series is a self-priming pump. It is fitted with a pressure switch to provide “on demand” spraying and cut out.

It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump).

For vertical pump mounting be sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak.

Features

• Self-primes up to 2.4m vertical lift
• Handles Water-Like and Viscous Liquids up to 250 cP
• Four-piston design delivers higher flow rates
• Chemical-resistant polypropylene pump head for Iong life
• Choice of elastomeric materials to work with many chemicals
• Quick-connect plug-in ports for easy installation
• In built pressure-switch control to run the pump only as needed

$315.00 *
Old price $312.00
Delivery weight: 3 kg

Flojet 4300-504 18L/min 45psi 12v pump

Flojet 4300-504

Flojet 4300 series pumps are suitable for a wide range of agricultural and industrial applications. With flow rates to 18 LPM and pressure to 45 PSI the 4300 series pump range is suitable for boom spraying as well as application and transfer of many chemicals.

The Flojet 4300-143 has an open flow rate of 18 LPM and is fitted with Viton checkvalves and santoprene diaphragms.

The Flojet 4300 series is a self-priming pump. It is fitted with a pressure switch to provide “on demand” spraying and cut out.

It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump).

For vertical pump mounting be sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak.

4300-504

• Self-primes up to 2.4m vertical lift
• Handles Water-Like and Viscous Liquids up to 250 cP
• Four-piston design delivers higher flow rates
• Chemical-resistant polypropylene pump head for Iong life
• Choice of elastomeric materials to work with many chemicals
• Quick-connect plug-in ports for easy installation
• In built pressure-switch control to run the pump only as needed

$359.00 *
Old price $395.00
Delivery weight: 1.8 kg

Flojet 4300-506 18L/min 45psi 12v pump

Flojet 4300-506

Flojet 4300 series pumps are suitable for a wide range of agricultural and industrial applications. With flow rates to 18 LPM and pressure to 45 PSI the 4300 series pump range is suitable for boom spraying as well as application and transfer of many chemicals.

The Flojet 4300-143 has an open flow rate of 18 LPM and is fitted with Geolast checkvalves and Buna diaphragms. These materials are compatable with diesel.

The Flojet 4300 series is a self-priming pump. It is fitted with a pressure switch to provide “on demand” spraying and cut out.

It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump).

For vertical pump mounting be sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak.

4300-506

• Self-primes up to 2.4m vertical lift
• Handles Water-Like and Viscous Liquids up to 250 cP
• Four-piston design delivers higher flow rates
• Chemical-resistant polypropylene pump head for Iong life
• Choice of elastomeric materials to work with many chemicals
• Quick-connect plug-in ports for easy installation
• In built pressure-switch control to run the pump only as needed

$339.00 *
Old price $375.00
Delivery weight: 1.8 kg
*
Prices incl. GST, plus delivery