Control Valves

Control Valves

The Co-Op has a wide range of Pressure Control Valves and solenoids for 12 volt and Diaphragm pumps.

Silvan, Bertolini and Imovilli OEM Control valve along with Solenoid valves from quality manufacturers TeeJet and ARAG which can be connected to spray rate controllers or used with simple switch box systems.


Display per page
Sort by

12v Pump Pressure Regulator -5D Pump Quick connect

Regulator for 12v Pump with Female nut connection to pump

Generate a smooth constant flow with your 12 volt pump rather than stop start fluctuaion.
Ideal for boom spraying applications.
Suitable for pumps u[ to 20L/min flow
Suits many brands of pumps including Delavan*, Flojet*, Stanley, Northstar, Silvan Aquatec*, Shurflo*, Seaflo* etc
Not sure if it fits your pump get in contact with us to find out
 

Features;

  • Polypropylene body reinforced with fibreglass
  • 1/8” (BSP) for pressure gauge connection
  • EPDM seals
  • Internal parts in DELRIN and stainless steel AISI 303 for long life
  • Regulating graduated indicator

* various models

$44.00 *

12v Pump Pressure Regulator - 1/2" Female Thread Mount

Regulator for 12v Pump with 1/2" male thread connection

Generate a smooth constant flow with your 12 volt pump rather than stop start fluctuaion.
Ideal for boom spraying applications.
Suitable for pumps u[ to 20L/min flow
Ideal for Shurflo*, Flojet*, Seaflo*, Delavan*
Not sure if it fits your pump get in contact with us to find out
 

Features;

  • Polypropylene body reinforced with fibreglass
  • 1/8” (BSP) for pressure gauge connection
  • EPDM seals
  • Internal parts in DELRIN and stainless steel AISI 303 for long life
  • Regulating graduated indicator

* various models

$44.00 *

TeeJet Solenoid valve

AA144A DirectoValve® Control Valves

AA144A DirectoValve® Control Valves for spray boom section and or master control, 

Features

  • Direct acting; large internal flow chamber without pilot hole reduces chance of clogging.
  • Stainless steel wetted parts provide additional corrosion resistance.
  • Operates on 12 VDC system.
  • Maximum pressure of 100 psi (7 bar).
  • Encapsulated solenoid coil can be changed without removing valve from system.
  • EPDM diaphragms and seat washers.
  • Continuous flow through bypass connection, with flow to spray line controlled by valve "on-off" action.
  • 10 gpm (37.9 l/min) with 5 psi (0.34 bar) pressure drop.
  • Can be ganged with other 144A DirectoValve control valves. (2nd image shows this)
  • 2.5 amp current draw.
  • Polypropylene body for chemical resistance.
  • Fabric reinforced diaphragms.

 

Inlet Size

Outlet Size

Current Draw

 

3/4"

1/2"

2.5 amp

 

$365.00 *
Delivery weight: 0.4 kg

Solenoid valve for spraying TeeJet AAB144A-3

AA144A DirectoValve® Control Valves bank of 3 inline solenoid valves

Features

  • Direct acting; large internal flow chamber without pilot hole reduces chance of clogging.
  • Stainless steel wetted parts provide additional corrosion resistance.
  • Operates on 12 VDC system.
  • Maximum pressure of 100 psi (7 bar).
  • Encapsulated solenoid coil can be changed without removing valve from system.
  • EPDM diaphragms and seat washers.
  • Continuous flow through bypass connection, with flow to spray line controlled by valve "on-off" action.
  • 10 gpm (37.9 l/min) with 5 psi (0.34 bar) pressure drop.
  • Can be ganged with other 144A DirectoValve control valves. (2nd image shows this)
  • 2.5 amp current draw.
  • Polypropylene body for chemical resistance.
  • Fabric reinforced diaphragms.

 

Inlet Size

Outlet Size

Current Draw

 

3/4"

1/2"

2.5 amp

 

 

$1,089.00 *
Delivery weight: 1.2 kg

TeeJet AAB144P-1 Directo Valve

AA144P DirectoValve® Control Valve

 

$495.00 *
Delivery weight: 1.2 kg

Solenoid valve for spraying TeeJet AAB144P-3

AA144P DirectoValve® Control Valves bank of 3 inline solenoid valves

The 144P-1-3 three-way solenoid-operated DirectoValve control valve was specifically designed to provide bypass control in spraying applications. When used with part number 23520-PP throttling valve or a 4916 metering orifice place in the bypass line, it can provide for a constant pressure spray system.

Features
 

  • For pressures up to 65 psi (4.5 bar).
  • 8 gpm (30 l/min) with a 5 psi (0.34 bar) pressure drop.
  • Fabric reinforced Viton® diaphragms.
  • Nylon encapsulated 12 VDC coil with 1/4" QuickConnect terminals.
  • Power requirement 2.5 amp.
  • Glass filled polypropylene (black) valve body.
  • Internal metal parts are stainless steel.
  • No stroke adjustment needed.
  • Corrosion resistant, 430SS solenoid grade armature and armature stop.

 

 

Inlet Size

Outlet Size

Current Draw

 

3/4"

1/2"

2.5 amp

 

 

$1,485.00 *
Delivery weight: 1.2 kg

TeeJet DirectoValve 344 Series electric shut off ball valve

344 Series Electric Shutoff Valves

344B shutoff ball valves are available with E or EC series motors and with cable or DIN electrical connections. 

Features

  • 25 rpm, 0.6 second shutoff fully open to close.
  • 1" BSPT inlet/outlets provide quick simple plumbing for a single vavle.
  • 2-way valves allow complete shutoff.
  • Polypropylene or stainless steel ball.
  • Maximum pressure rating is 300 psi (20 bar).
  • The flow rate for the 344BEC 2-way valve is 32 gpm (121 l/min) with a 5 psi (0.34 bar) pressure drop.
  • Wetted parts are nylon, Teflon®, polypropylene, stainless steel, and Viton®.

Email us for other sizes and models of this DirectoValve.

Like further information regarding these valves Click here

$612.59 *
Delivery weight: 1 kg

Inline solenoid valve

Normally Closed Solenoid Valve

Designed for pressures up to 6 Bar (90 psi)

  • Polymer construction
  • 1/2" or 3/4 "BSP Female ports
  • 12/24v operation
  • Direct-Acting Piston Structure
  • Viton seals
$57.90 *
Old price $57.90
Delivery weight: 0.3 kg

New Orchard Sprayer Rotary Control Valve

Orchard Air Blast Sprayer Control with Pressure control valve and Pressure Gauge.

Can be retro fitted to Silvan Airblast Sprayers where the old 'Pentomatic' valve has failed. 

Suitable for use in many other applications where a High pressure valve system is required.

  • Max. operating pressures: 50 bar (725 psi)
  • Flow rate: 150 l/min (40 USGal/min)
  • Weight: 2.8 kg (6.2 lb) 
  • Materials:
  • brass 
  • AISI 304 balls
  • AISI 303 seats
  • high resistance plastic materials
  • stainless steel vacuum hardened regulator piston and seat
  • Buna N
  • PTFE

 

  • Use: For agriculture use on boom and air blast sprayers.
  • Selects spraying positions.
  • PTFE cam support for smooth spraying selection operations.
  • Precise and reliable pressure adjusting even at low pressures.
  • Parts designed for maximum corrosion and wear resistance.
  • Functionality and long life assured by materials used and fault proof manufacturing
$712.00 *
Old price $770.00
Product data sheet
Delivery weight: 3 kg
*
Prices incl. GST, plus delivery