TeeJet AI Air Induction Fan Spray Tips

TeeJet AI Air Induction Fan Spray Tips

Price inc. GST
Delivery weight: 25 g
Delivery Estimator Calculates delivery cost for this product
or 4 payments of $7.37 with Afterpay Learn more
Price reductions

Possible delivery methods: Australia Post - Parcel post, Large Item Delivery, Australia Post - Express post
Looking for a quantity of these nozzles don't forget to we offer bulk discounts, just click on, 'Price Reductions' on this page to learn more.
If you are looking for a different bulk quantity then click on, 'Ask a question' on this page.


  • Stainless steel insert produces a tapered edge flat spray pattern for uniform coverage in broadcast spraying.
  • Polymer insert holder and pre-orifice with ISI VisiFlo® color-coding.
  • Larger droplets for less drift.
  • Available in eight capacities with a recommended pressure rating 30–115 PSI (2–8 bar).
  • Depending on the chemical, produces large air-filled drops through the use of a Venturi air aspirator.
  • Pressure ranges from 2-8 Bar
  • Sizes availalbe 015 - 08
  • 110º spray swarth
  • Automatic spray alignment with 25598-*-NYR Quick TeeJet® cap and gasket.

Typical Applications

Post-emerge systemic herbicides
Systemic Funcides & insecticides

Nozzle selection is often based upon droplet size. The droplet size from a nozzle becomes very important when the efficacy of a particular plant protection chemical is dependent on coverage, or the prevention of spray leaving the target area is a priority.

The majority of the nozzles used in agriculture can be classified as producing droplets in the range of fine to ultra coarse droplets. Nozzles that produce droplets in the finer to middle portion of the range are usually recommended for post-emergence contact applications, which require excellent coverage on the intended target area. This may include herbicidesinsecticides and fungicides. Nozzles producing droplets from the middle to coarser end of the range, while offering less thorough surface coverage, provide significantly improved drift control. These nozzles are commonly used for systemic and pre-emergence surface applied herbicides. An important point to remember when choosing a spray nozzle that produces a droplet size in one of the eight categories is that one nozzle can produce different droplet size classifications at different pressures. A nozzle might produce medium droplets at low pressures, while producing fine droplets as pressure is increased.

Droplet size classes are shown in the following tables to assist in choosing an appropriate spray tip.



Like further information checkout these files;

TeeJet - 'Nozzle Selection Guide'

TeeJet - 'Sprayer Calibration'

Teejet - ISO Application Rate Table

Teejet Nozzle Droplet size Charts

TeeJet - 'Causes of Drift'

TeeJet - 'Droplet size and drift'

TeeJet - 'Nozzles for Spray Drift Control'

TeeJet - 'Spray Distribution Quality'

TeeJet - 'Useful Information & Formula's'

We also recommend

Prices incl. GST, plus delivery

Browse this category: TeeJet Spray Nozzles