TeeJet TTi turbo Air Induction Spray Tips


TeeJet TTi turbo Air Induction Spray Tips

from $23.50
Price inc. GST
Delivery weight: 20 g
Delivery Estimator Calculates delivery cost for this product
or 4 payments of $5.87 with Afterpay Learn more
Price reductions


Possible delivery methods: Australia Post - Parcel post, Large Item Delivery, Australia Post - Express post
Looking for a quantity of these nozzles don't forget to we offer bulk discounts, just click on, 'Price Reductions' on this page to learn more.
If you are looking for a different bulk quantity then click on, 'Ask a question' on this page.
 

The TeeJet TTi is a proven, reliable spray tip developed specifically with drift reduction in mind. It produces Ultra Coarse (UC) and Extremely Coarse (XC) droplets, for the ultimate drift control. Additionally, this spray tip generates less than 2% driftable fines* – one of the very lowest driftable fines percentages of all spray tips available today.

TTi Nozzles are suitable for 2,4-D application under the current madatory regulations requiring droplets no smaller than VC (Very Coarse) as per 2,4-D chemical label.

Looking for a quantity of these nozzles don't forget to we offer bulk discounts, just click on, 'Price Reductions' on this page to learn more.
If you are looking for a different bulk quantity then click on, 'Ask a question' on this page.
 

Features:

  • Extra Course(XC) and Ultra Course(UC) droplet size as recommended in legislation for minimising spray drift
  • 110° degree wide angle, air induction, tapered flat spray tip pattern based on the patented outlet orifice design of the original Turbo Teejet nozzle
  • Patented orifice design provides large, round passages to minimize plugging
  • Depending on the chemical, produces large air-filled drops through a Venturi air aspirator resulting in less drift
  • All polymer construction for excellent chemical and wear resistance
  • Compact size to prevent tip damage
  • Removable pre-orifice
  • Ideal for use with automatic sprayer controllers
  • Wide operating pressure range: 15-100 PSI (1-7 bar)

Automatic alignment when used with 25598-*-NYR Quick Teejet cap and gasket

Typical Applications

Pre-emergence Soil applied herbicides
Post-emergence systemic herbicides
Systemic Fungicides & Insecticides

Nozzle selection is often based upon droplet size. The droplet size from a nozzle becomes very important when the efficacy of a particular plant protection chemical is dependent on coverage, or the prevention of spray leaving the target area is a priority.
The majority of the nozzles used in agriculture can be classified as producing droplets in the range of fine to ultra coarse droplets. Nozzles that produce droplets in the finer to middle portion of the range are usually recommended for post-emergence contact applications, which require excellent coverage on the intended target area. This may include herbicidesinsecticides and fungicides. Nozzles producing droplets from the middle to coarser end of the range, while offering less thorough surface coverage, provide significantly improved drift control. These nozzles are commonly used for systemic and pre-emergence surface applied herbicides. An important point to remember when choosing a spray nozzle that produces a droplet size in one of the eight categories is that one nozzle can produce different droplet size classifications at different pressures. A nozzle might produce medium droplets at low pressures, while producing fine droplets as pressure is increased.

Droplet size classes are shown in the following tables to assist in choosing an appropriate spray tip.

TTi_Droplet_spectrum

TTi_Nozzle_Appl_guide.

Like further information checkout these files;

TeeJet - 'Nozzle Selection Guide'

TeeJet - 'Sprayer Calibration'

Teejet - ISO Application Rate Table

Teejet Nozzle Droplet size Charts

TeeJet - 'Causes of Drift'

TeeJet - 'Droplet size and drift'

TeeJet - 'Nozzles for Spray Drift Control'

TeeJet - 'Spray Distribution Quality'

TeeJet - 'Useful Information & Formula's'

Accessories

Product Note Status Price
TeeJet Single Wet Boom Non Drip Nozzle Bodies TeeJet Single Wet Boom Non Drip Nozzle Bodies
$10.45 *

Product data sheet

Delivery weight: 80 g
ARAG Quick Cap non-drip nozzle holders ARAG Quick Cap non-drip nozzle holders
from $12.80 *

Product data sheet

Delivery weight: 0.075 kg
Reinforced Stainless Mesh Nozzle strainers Reinforced Stainless Mesh Nozzle strainers
from $2.83 *
Delivery weight: 15 g
*
Prices incl. GST, plus delivery
Display accessory details

Browse this category: TeeJet Spray Nozzles