Pumps

Pumps

Display per page
Sort by

SHURflo 2088-313-145 12v Pump 13.6 l/min

The 2088-313-145 pump is designed for continuous use in spraying fluid transfer applications, these include boom spraying and spot spraying where bypass agitation systems are used and therefor the pump does not shut down.

  • Pump Premium with Cooling Fins
  • 13.6 LPM Open Flow
  • 12VDC Continuous Duty
  • Viton Valves
  • Santoprene Diaphragm
  • 3 Bar (45 PSI)
  • Demand Switch (adjustable 30-50 PSI)
  • 1/2" MSPT Ports
  • Polypropylene Housing
  • Rubber mounted base

Specifications

  • Positive Displacement 3 Chamber Diaphragm Pump 
  • CHECK VALVE: (1-Way Operation) Prevents Reverse Flow 
  • CAM: 3.0 Degree 
  • MOTOR: Permanent Magnet, P/N 11-185-06, Thermally Protected 
  • VOLTAGE: 12 VDC Nominal 
  • PRESSURE SWITCH: Adjustable from 30 to 50 PSI. Factory Set @ 45 PSI Shut-Off, Turn On 25 PSI 5 PSI 
  • LIQUID TEMPERATURE: 170 Degrees Fahrenheit (77 Degrees Centigrade) Max. 
  • PRIME: Self-Priming Up To 8.0 Ft. Vertical, Max. Inlet Pressure 30 PSI (2.1 Bar) 
  • PORTS: 1/2"-14 Male Parallel Thread MATERIAL OF CONSTRUCTION: 
  • PLASTICS- Polypropylene 
  • VALVES- Viton 
  • DIAPHRAGM- Santoprene 
  • FASTENERS- Stainless Steel 
  • NET WEIGHT: 6.8 Lbs (3.1 Kg) 
  • DUTY CYCLE: Continuous (See Temperature Rise Chart) 
  • TYPICAL APPLICATIONS: Agricultural Spraying 
$491.00 *
Old price $685.00
Delivery weight: 2.48 kg

SHURflo 2088-343-135 12v Pump 11.3 L/min

2088 Shurflo pump

Brand new Heavy duty 12 volt pump with Viton®  valves! this is a step up on the standard unit which can fail through premature breakdown through lack of chemical resistance.

2088-343-435 SHURFLO 2088 SERIES  diaphragm pump is Shurflo’s specialist agriculture pump, ideal for boom spray (higher volumes and spot spray work. Viton® valve material and Santoprene diaphragms assures maximum chemical resistance. 11.3 litres/ minute 45 psi Ideal boom spray applications where higher volume may be required and works well with a spray gun especially spray tank agitation is required whilst spraying. May also be used for a reliable camper-van/motor-home water pump. This pump is fitted with pressure cut out so when you turn off the tap the pump shuts down (unless there is a secondary outlet).

Note this Pump is also referred to as 2088-343-135 (Sprayer manufacturer dependent)

 This unit may be used to replace the pump on most 12v spray thanks if unsure just ask me, this unit can replace many standard Shurflo pumps where they were originally set up just for spot spray work but now boom spray work is also required.. 

Specifications 

  • 11.3 l.p.m. open flow
  • 3 Bar (45 psi)
  • 1/2” BSP male 
  • Santoprene diaphrams
  • Viton Valves
  • 12 Volt with pressure cut out
$255.00 *
Delivery weight: 2.5 kg

Shurflo 5059-1311-D012 20 l/min

Shurflo High Volume 12 Volt pump

The 5059 is the 'Big Boy' of the Shurflo Agricultural series pumps, it's ideal for operating dual hand guns even 3 in some applications or a larger size spray boom. The design of this pump allows it to replace/upgrade smaller Shurflo Models and can be used in many applications from weed spraying to fertilizer and even hydroponics whilst applications outside of agriculture can also be many and varied from camper water supply to fluid transfer even dog wash systems.

A step up on standard 12 volt pumps Shurflo 'Agriculture' range can withstand many chemicals and last the test of time, ensuring you long life and hassle free days.

This unit is fitted to many Goldacres Sprayers along with other premium sprayer brands.

NOTE; This has a 60psi pressure switch cut out. 

Features;

  • 20.1 Lpm open flow
  • 1/2" MSPT male threads
  • Santoprene diaphragms
  • Viton Valves
  • 12v continuous duty
  • 12 volt 60 PSI pressure cut out switch
  • Self priming to 2.4m
  • Standard rubber mount baseplate to enable upgrades from smaller size shurflo pumps (8000 & 2088 series)

 

$497.00 *
Old price $532.00
Delivery weight: 3.5 kg

Shurflo 12v 7.4 Bar (107 Psi), 6.8 l/min high pressure pump

Heavy Duty 12 volt pump with Viton Valve

SHURFLO 8000 SERIES diaphragm pump is Shurflo’s most widely used agriculture pump. Viton® valve material and santoprene diaphragms assures maximum chemical resistance. 6.8 litres/minute open flow and a maximum of 7.4Bar (107 psi) makes this pump ideal for small & specialty crop spray boom applications when used with a pressure control valve. The higher pressure works better with a spraygun especially on hillsides and where longer spray distance is required especially giving added benefit for longer hose lengths. This pump is fitted with pressure cut out so when you turn off the tap the pump shuts down (unless there is a secondary outlet).
This unit may be used to replace the pump on most 12v spray tanks to upgrade pumps on many units like Silvan & Croplands 'Pak' range of 12v sprayers and offer the benefit of greater pressure. 

Specifications

  • 6.8 l.p.m. open flow
  • Max 7.4 Bar (107 psi)
  • 6.9 bar (100PSI) demand switch with internal bypass 
  • 1/2” BSP male outlets
  • Santoprene® diaphragm
  • Viton® valves
  • 12 Volt with pressure cut out
  • Supplied with Shurflo 10mm hose connections (1 x straight & 1 x elbow)

*note we recommend using the Shurflo hose connection fittings to ensure correct fitment, performance and reliability & please read booklet supplied with pump.

 

$180.00 *
Old price $263.00
Product data sheet
In stock
Delivery weight: 2.48 kg

Shurflo 8000-543-136 12v pump 6.8 l/min

Shurflo 60 Psi 12 volt pump with Viton®  valves

SHURFLO 8000 SERIES diaphragm pump is Shurflo’s most widely used agriculture pumpViton® valve material and santoprene diaphragms assures maximum chemical resistance. 6.8 litres/minute open flow and a maximum of 4Bar (60 psi) makes this pump a universally accepted standard for many Spraying application including for small spray boom applications when used with a pressure control valve or match flow rated nozzles. The 8000-543-136 alsoe works with a sprayguns in spot spraying applications. The pump is fitted with pressure cut out so when you turn off the tap the pump shuts down (unless there is a secondary outlet). Reliability of this model known across Australia has been proven over the years with it first going on sale in the late 1980's.
This unit may be used to replace the pump on most 12v spray tanks to upgrade pumps on many units like Silvan & Croplands 'Pak' range of 12v sprayers and offer the benefit of greater pressure. 

Optional equipment;

10mm straight & elbow hose barb connections,
13mm straight & elbow hose barb connections,
Suction Filter with 13mm hose barb connection,
Pressure control valve.

Specifications

  • 6.8 l.p.m. open flow
  • Max 6 Bar (60 psi) 
  • 1/2” BSP male outlets
  • Santoprene® diaphragm
  • Viton®valves
  • 12 Volt with pressure cut out
  • Supplied with Shurflo 13mm hose connections (1 x straight & 1 x elbow)

*note we recommend using the Shurflo hose connection fittings to ensure correct fitment, performance and reliability & please read booklet supplied with pump.

from $180.00 *
Product data sheet
In stock
Delivery weight: 2.48 kg
*
Prices incl. GST, plus delivery