All

These fittings are especially suitable for connecting hoses and tubing in a wide variety of applications from Agriculture, Spraying, Industrial, Au...

Filtering Capacity 160~220 L/min Cartridge 107 x 200 mm Polypropylene body Brass fixing inserts 32, 50 & 80 mesh Note this unit is designed f...

12v, 11.4 L/min Capacity. Suitable for spraying with smaller spray booms (when used with pressure regulator), boomless nozzles or running Dual spot...

FLOJET Industrial Triplex Low Pressure Series pumps are designed for a wide range of applications and are constructed from a selection of materials...

FLOJET Industrial Triplex Low Pressure Series 12v pumps are designed for a wide range of applications and are constructed from a selection of m...

Rear Light for Connix Lighting Sets LH (Magnetic)

These nozzle holders a designed to take the same quick release cap as standard on most boom sprayers (not Hardi). Adjust the nozzle spray outlet to...

Flojet 8 LPM 12VDC 50 PSI self priming diaphragm liquid pump. Constructed with polyprolylene housing, viton check valves & diaphragm to handl...

Powder coated steel Lockable hub and locking pin Supplied with 30m of 3/8” Ag hose Common foot print suits 300L Lighfoot and 400L/800L Squatpak ta...

Threaded ring for flat surfaces. Looking for the lid that fits this CLICK HERE

Galvanised steel 50x50mm frame Delivers spray 90 or 180 degrees Supplied with 2m delivery hose with On/Off tap Fitted with M99-65 model nozzle fo...

Genuine Upper Housing replacement Kit for 8000-547-189 SHURflo 12v pumps. Supplied in Blister pack replacement Upper Housing with 1/2 BSP Male thre...

Genuine Drive Assy. & Santoprene Diaphragm replacement Kit for 8000-543-136 SHURflo 12v pumps. Supplied in Blister Pack. This SHURflo Viton Val...

Red Quick Fitting Cap With Gasket can be used with a variety of spray tips where spray does not require quick alignment or for use with hose barb c...

For use on outlet of Braglia M4, M23, M29 and M30 Series Spraygun trigger units to adapt to many different Nozzle and spray lance assemblies. Thre...

Fits DDP-552A Silvan Pumps

Tractor category 1 - 7/8" (22mm)  Lower link Ball with 51mm OD. Made of 1018 Steel Sold individually

Silvan Part GG00001002

Used in conjunction with G10041 O-ring seal CLICK HERE to view.

Suitable for Tractors up to HP/Kw 180hp (135kW) Min. Length : 610mm, Max. Length :825mm, Supplied with : Hose set, chain and ball, marker label wi...

Sold in packs of 50 Easy to use round clip once locked around the shaft being retained ensures it'll stay in place. Great for use on front end load...

Sold in packs of 10 Save loosing lynch pins with these locking type pins, the easy to use round clip once locked around the shaft being retained en...

Sold in packs of 10 Save loosing lynch pins with these locking type pins, the easy to use round clip once locked around the shaft being retained en...

Temperature Probe – 59 inchProduct FeaturesEasily measure and manage the temperature of solid materials in the field or bin on the following mat...

Use with small square or round balersNew multi- sensor technology with greater accuracyAverages displayed every 3 secondsBacklit LCD display for ni...

Detail Cap I.D 83.7mmCap O.D 110.0mmLockable - NoMaterial - PlasticVented - Yes Suitable For Make/Model John Deere5210, 5310, 5310N, 5400, 5400N, 5...

Detail Cap I.D 26.9mmCap O.D 65.4mmLockable - NoMaterial - MetalVented - Yes Suitable For Make/Model Fiat100-55, 100-90, 110-90, 115-90, 130-90, 14...

Detail Cap I.D 48mmCap O.D 73.2mmLockable - NoMaterial - MetalVented - No Suitable For Make/Model Case IH / International Harvester238, 2400, 248, ...

Detail Cap I.D 76mmCap O.D 110mmLockable - NoMaterial - MetalSeal I.D 76.9mmSeal O.D 104.5mmVented Yes Suitable For Make/Model Deutz-FahrD 10006, ...

Detail Cap I.D 82.6mmCap O.D 89.8mmLockable - NoMaterial - PlasticSeal I.D 82.6mmVented Yes Suitable For Make/Model Case IH / International Harvest...

Ideal for use with adjustable stabiliser bars: (Click the image to view) Hole Ø 12mm (1/2") Overall length 110mm (4 21/64"ins) Pin Ø 2...

Adjustable Lift Arm Stabiliser Bar. Please Note: Stabiliser pin also required if not already fitted, as these Adjustable stabiliser bars fit ...