Nozzle Holders

Hinged clamp type non-drip boom sprayer nozzle holder with diaphragm check valve and quick coupling (cap not included). Silvan Uses 1/2" x 7mm inle...

TeeJet boom spray single non-drip nozzle holder body QJ17560A is a very common nozzle holder that can fit many brands in Australia. Features Chem-...

To be used without spraying boom, ideal for spraying orchards, vineyards, grasses and grazing lands When fitted with boomless Nozzles (See Here) bi...

You dont need these until you do, the end of the spray boom has worked its way through the fence and broken the nozzle off or its hit the ground! b...

Ideal for replacement on older sprayer or when building your own DIY spray boom. Quick Cap system facilitates correct spray tip positioning. Intec ...

Ideal for replacement on older sprayer or when building your own DIY spray boom. Quick Cap system facitlitates correct spray tip positioning. Intec...

Through Flow Quick Connect Bayonet Cap mount Available in various hose sizes; 3/8' (10mm) 1/2" (13mm) Accepts Standard Quick connect nozzle caps a...

Single inlet, Quick Connect Bayonet Cap mount Available in various hose sizes; 3/8' (10mm) 1/2" (13mm) Accepts Standard Quick connect nozzle caps ...

Sizes available; 3/4" (19mm) 1" (25mm) 1 1/4" (31.8mm) 1 1/2" (38mm) Use them to build your own boom

The adjustable angle nozzle holder will allow you to offset Spray direction by up to 90 degrees. Takes most styles of spray nozzles including TeeJe...

The adjustable angle nozzle holder will allow you to offset Spray direction by up to 90 degrees. Takes most styles of spray nozzles including Tee...

The adjustable angle nozzle holder will allow you to offset Spray direction by up to 90 degrees. Takes most styles of spray nozzles including TeeJ...

The adjustable angle nozzle holder will allow you to offset Spray direction by up to 90 degrees. Takes most styles of spray nozzles including TeeJe...

TeeJet swivel nozzle bodies are primarily for use with tips employed in row crop spraying. A locknut holds swivel bodies firmly in position at sele...

Dual inlet Variable Space Threaded Nozzle holder with internal 1/4 BSP thread for easy mounting of swivel nozzles etc. Available in 10mm (3/8") an...

Replace your tired, old, bent, or loose Boom Spray Sprayline clamps These clamps are made from pressed steel to ensure strength and durability. Su...

Brass Swivel nozzle holder commonly used in fenceline spraying and Market garden Row Crop spraying, designed to accept most spray nozzles, can be f...

Brass Swivel nozzle holder commonly used in fenceline spraying and Market garden Row Crop spraying, designed to accept most spray nozzles, can be f...

Brass Swivel nozzle holder commonly used in fenceline spraying and Market garden Row Crop spraying, designed to accept most spray nozzles, can be f...

Brass Swivel nozzle holder commonly used in fenceline spraying and Market garden Row Crop spraying, designed to accept most spray nozzles, can be f...

These nozzle holders a designed to take the same quick release cap as standard on most boom sprayers (not Hardi). Adjust the nozzle spray outlet to...

Adjust the nozzle spray outlet to the angle you need to target your application and get the job done right. Great for fence-line spraying applicat...