12v, 7.5 L/min Capacity. Suitable for spraying with small boomless nozzles or running spot spray guns.

Detail;

Pump Type: Demand

• Heavy duty steel cased motor and sealed ball bearings on motor shaft.
• Flow: Up to 7.5L/min (2.0 GPM)
• Pressure: Up to 4 Bar (60 PSI)
• 5.7 Amp Max current draw
• Valves: Viton
• Diaphragm: Santoprene
• Ports: 3/8" FNPT (threaded)
• Power: 12V Wire Leads with 2-pin molded connector
• Weight: 2.9 Kg (6 lbs)
• 100% Factory tested
• NSF Approved (Santoprene only)
• High Torque Motor for superior flow at pressure
• Self-Priming
• Can be run dry

Demand Pumps include a built-in pressure switch to automatically stop and start the pump at specific pressure settings. These pumps only run when discharge outlets are open and fluid delivery is needed. However, ON/OFF cycling at extreme frequency can cause damage to the pump components.

Advantages: Pump only runs when flow is needed and offers reduced noise during system idle. Automatically turns pump off when not in use. Common Uses: Spot spraying, soft wash, single outlet systems.

Need a suction filter for this pump CLICK HERE

Rapid Spray APD0077T10ERP